BPM to Milliseconds Converter
- 1/4 note
- 1/8 note
- 1/16 note
- 1/32 note
- Dotted 1/4
- Dotted 1/8
- Triplet 1/4
- Triplet 1/8
BPM to ms conversion chart
Use this chart when you need a quick fixed reference without changing the calculator. Each cell shows the exact note duration rounded to two decimal places.
| BPM | 1/4 | 1/8 | 1/16 | 1/32 | Dotted 1/4 | Dotted 1/8 | Triplet 1/4 | Triplet 1/8 |
|---|---|---|---|---|---|---|---|---|
| 60 | 1000.00 ms | 500.00 ms | 250.00 ms | 125.00 ms | 1500.00 ms | 750.00 ms | 666.67 ms | 333.33 ms |
| 70 | 857.14 ms | 428.57 ms | 214.29 ms | 107.14 ms | 1285.71 ms | 642.86 ms | 571.43 ms | 285.71 ms |
| 80 | 750.00 ms | 375.00 ms | 187.50 ms | 93.75 ms | 1125.00 ms | 562.50 ms | 500.00 ms | 250.00 ms |
| 90 | 666.67 ms | 333.33 ms | 166.67 ms | 83.33 ms | 1000.00 ms | 500.00 ms | 444.44 ms | 222.22 ms |
| 100 | 600.00 ms | 300.00 ms | 150.00 ms | 75.00 ms | 900.00 ms | 450.00 ms | 400.00 ms | 200.00 ms |
| 110 | 545.45 ms | 272.73 ms | 136.36 ms | 68.18 ms | 818.18 ms | 409.09 ms | 363.64 ms | 181.82 ms |
| 120 | 500.00 ms | 250.00 ms | 125.00 ms | 62.50 ms | 750.00 ms | 375.00 ms | 333.33 ms | 166.67 ms |
| 128 | 468.75 ms | 234.38 ms | 117.19 ms | 58.59 ms | 703.13 ms | 351.56 ms | 312.50 ms | 156.25 ms |
| 130 | 461.54 ms | 230.77 ms | 115.38 ms | 57.69 ms | 692.31 ms | 346.15 ms | 307.69 ms | 153.85 ms |
| 140 | 428.57 ms | 214.29 ms | 107.14 ms | 53.57 ms | 642.86 ms | 321.43 ms | 285.71 ms | 142.86 ms |
| 150 | 400.00 ms | 200.00 ms | 100.00 ms | 50.00 ms | 600.00 ms | 300.00 ms | 266.67 ms | 133.33 ms |
| 160 | 375.00 ms | 187.50 ms | 93.75 ms | 46.88 ms | 562.50 ms | 281.25 ms | 250.00 ms | 125.00 ms |
How this is calculated
msPerBeat = 60000 / BPM
There are 60,000 milliseconds in one minute. BPM tells you how many beats fit into that minute, so dividing 60,000 by the tempo gives the duration of one beat. At 120 BPM, the calculation is 60,000 ÷ 120 = 500 ms. In common 4/4 time, that beat is normally a quarter note. An eighth note takes half as long, a sixteenth takes one quarter as long, and a thirty-second note takes one eighth as long.
A dotted note includes the original note plus half of its value. That makes a dotted quarter 1.5 beats and a dotted eighth 0.75 beats, so the converter multiplies the beat duration by 1.5 or 0.75. Triplets divide a span into three equal parts instead of two. A quarter-note triplet fits three notes into two beats, making each note two-thirds of a beat. An eighth-note triplet is one-third of a beat.
The calculator always starts with the unrounded beat duration, applies the selected multiplier, and rounds only the displayed result to two decimal places. This avoids compounding a rounding difference at tempos that produce repeating decimals.
What producers use this for
Tempo-synced delay times
Delay plug-ins often offer note-sync controls, but hardware units and some detailed plug-in modes expect milliseconds. Converting the project BPM lets you set repeats that land on the rhythmic grid instead of drifting between beats. At 120 BPM, one beat is 500 ms, so a dotted eighth-note delay is 500 × 0.75 = 375 ms. That setting creates the familiar syncopated repeat pattern heard in rhythmic guitar, synth, and vocal effects.
Aligning samples and drums
A one-shot, percussion tail, or chopped loop can feel late when its useful length crosses the next grid line. Note durations give you precise edit targets. At 120 BPM, a sixteenth note is 125 ms, so you can trim a short hi-hat, move a transient, or set a sampler envelope around that interval. The value also helps when checking whether a delay printed into a sample will reinforce the groove or overlap the following drum hit.
Compressor attack and release
Attack and release controls shape how a compressor follows musical movement. A tempo-related release can return the gain reduction toward zero in time for the next beat or subdivision. Start with a quarter, eighth, or sixteenth-note value, then shorten or lengthen it while listening for pumping and lost transients. For attack, smaller subdivisions provide practical reference points, but the best setting still depends on the source envelope, threshold, ratio, and the compressor's response curve.